ECS Magnets: Brand Descriptions

Neomag S

Data Sheet | Table of Properties

Sintered RE-Fe-B - This material enhances the room temperature performance of permanent magnets by 30 - 50 %. Raw materials for Neomag S are in much more plentiful supply than those for SmCo magnets. And Neomag S contains no cobalt, which is costly and sometimes in critical supply.

Neomag I & C

Data Sheet | Neomag I - Table of Properties | Neomag C - Properties

Injection Molded RE-Fe-B & Compression Molded RE-Fe-B - High magnetic flux density. High magnetic and thermal stability. Wide range of shaping possibilities with close manufacturing tolerances. Precision thin-walled parts. Good mechanical properties. High edge strength.

Koermax

Table of Properties

Sintered and Bonded Samarium Cobalt - Koermax S (Sintered Samarium Cobalt) grades are anisotropic. These materials offer high energy products and exceptional resistance to demagnetization in the presence of opposing field, with good remanence and temperature coefficient.

Bonded Koermax materials offer all the advantages of injection molded magnets – near net shape, tight tolerances, insert molding – while maintaining good remanence and temperature stability.

Koerox S 

Data Sheet | Table of Properties

Sintered Hard-Ferrite - Isotropic and anisotropic hard-ferrite magnets, made by powder metallurgy/sintering. Low-cost magnetic material. Broad raw materials base. Wide range of magnetic values. High operating temperatures. High chemical stability. Low electrical and thermal conductivity.

Koerox I

Data Sheet | Table of Properties

Injected Molded Ferrite - Close manufacturing tolerances. Good mechanical properties. High edge strength. Large variety of shaping possibilities. High operating temperatures through use of suitable binders.

Koerox HI

Data Sheet | Table of Properties

Hybrid Injection Molded Ferrite/RE-Fe-B - The simultaneous use of hard ferrite and NdFeB makes it possible to create a wide variety of plastic bonded permanent magnets. The different temperature coefficients of the two components result in more complex and technically very interesting properties compared with straight ferrite or NdFeB magnets.

Koerzit S

Data Sheet | Table of Properties

Sintered AlNiCo - Wide range of grades. High thermal stability of magnetic values. Operating temperatures up to 550°C. Good electrical and thermal conductivity.

> Magnets Selection Guidelines
> Magnets Grade Descriptions
> Magnets Tables of Properties
> Magnets Document Downloads

Home : : Products : : Solutions : : About ECS : : News : : Contact Us
© 2006 Energy Conversion Systems Holdings LLC